MECCA COLOURLESS PAINT 125ml

Composition: Natural resinous substances dispersed in alcoholic solution.

Method of use

Once the silver or aluminum leaf has been spread and any burnishing phase has been completed, apply the varnish with a brush or pad. When the first draft is completely dry, you can apply another coat of paint until the desired effect is achieved. Any dilution can take place with alcohol with an alcohol content equal to or greater than 94°. Drying time may vary depending on the layer applied and environmental conditions. For correct drying, we recommend an indicative time of at least 3 hours in a dry environment, at a temperature of around 20°C and away from dust.

Surrender

10 – 12 m2 / litre

storage

Store in a cool, dry place, closed in its container and away from direct sources of light and heat. The suitable environment should have temperatures between 15 and 25°C and relative humidity not exceeding 50%.

Further information

Application method and quantity applied can significantly influence workability times. Determine experimentally, depending on the media and the desired result, the most appropriate application methods.