Reconstruction of surface and grain in instance of superficial damage like scratches, etc. on pigmented leather.
Description
Instructions for use:
1. Clean the damaged area with Deep Cleaner F.
2. Dry the surface with blower or hairdryer.
3. Apply the “Surface repair” on the damaged spot with a spatula. Use small quantities of the product in order to create a fine film.
4. The direction of the first stroke is opposite of the direction in which the damage was created.
5. The direction of the second stroke is in the same direction in which the damage was created.
6. Dry with blower or hairdryer.
7. Repeat the treatment while applying fine layers until the damaged area is completely filled.
8. Spray the repaired area with High Coverage Color/Pigment Base Coat or Touch Up Pigment in the right color.
9. Dry with blower or hairdryer and repeat this until the repaired area is completely covered with paint.
10. Make a mold of the grain using the “Grain copier” and heat this mold with a blower until it changes color. Protect your hand with a cloth against the heat while heating.
11. Push the heated mold firmly for 10 - 15 seconds against the center of the repaired area with the grain in the proper position.
12. Recolor if necessary and, if you have used High Coverage Color or Pigment Base Coat , finish the area with top coat.
